Differences

This shows you the differences between two versions of the page.

--- mchadmin:building [2024/07/16 10:40] – created fecik
+++ mchadmin:building [2024/08/01 13:34] (current) – fecik
@@ Line 1: / Line 1: @@
 ====== MCh Building ======
 MCh is currently located in Kopernikusstraße 10 and shares the building with the Industrial Furnaces Institute (Industrieofenbau, IOB).
 We moved into the current building in 2011, a survey of the building history of Materials Chemistry can be found here...
@@ Line 8: / Line 9: @@
   * Movement to new building: 04.10.2010
-===== Building data =====
+===== Building Data =====
   * building name: Neubau AVZ I
   * building no.: 2162
   * address: Kopernikusstrasse 10, 52074 Aachen, Germany
-===== Entrance doors =====
+===== Entrance Doors =====
 ==== Main Entrance ====
 The main entrance door may be opened from 7:00 to 17:00 by pushing the door opener button on the service column on the right side of the door. Outside these regular office hours access to the building is only possible using a key (see below).
 The service column is also equipped with a numeric keypad which, along with the built-in speaker, may be used as a phone. Please dial the desired number and press the green button. All 5-digit RWTH phone numbers may be dialed.
 ==== Floor Entrance ====
 The floor entrance will be opened permanently during office hours using the key lock on the inside floor wall. in case that neither the secretary nor JMS nor the senior engineer is present any colleague may open these doors by using the backup key deposited in the copy room, first aid kit storage. Please mind to close doors again in the evening before you leave.
-===== Floor plans =====
+===== Floor Plans =====
 {{ :blog:legende.jpg?nolink&125|}}
@@ Line 63: / Line 67: @@
-===== Vibration damping =====
+===== Vibration Damping =====
 In the analytical lab section there are passive vibration platforms available, with the following parameters:
-=== Spring/damper system ===
+=== Spring/Damper System ===
-  * Load capacity: 6 kN/item. The manufacterer, however, stated that the dampers may be loaded with twice the load due to overdimensioning.
+  * Load capacity: 6 kN/item. The manufacturer, however, stated that the dampers may be loaded with twice the load due to overdimensioning.
-=== Large platforms ===
+=== Large Platforms ===
   * No. of dampers: 6
   * Length: 260 cm
@@ Line 80: / Line 85: @@
   * Net load: 730 kg
-=== Small platforms ===
+=== Small Platforms ===
   * No. of dampers: 4
   * Length: 200 cm