Differences

This shows you the differences between two versions of the page.

--- blog:nanoindenter [2016/01/04 12:47] – created hans
+++ blog:nanoindenter [2024/07/15 10:44] (current) – removed fecik
@@ Line 1: / Line 1: @@
-====== Nanoindenter ======
-Nanoindentation is carried out with a Hysitron TI-950 TriboIndenter at MCh. A diamond tip with special geometry (Berkovich, Cube Corner, Spherical) penetrates up to 10% of the coating's thickness by force or displacement control  with a //performech// control unit. The measurement consists of loading the sample, holding and unloading and Young's modulus and hardness of coatings are determined from the unloading part by the method of Oliver and Pharr. Maximum force and displacement values are 10 mN and 5 μm with resolution of 1 nN and 0.04 nm, respectively. Besides measurement of mechanical properties, the scanner can be used as atomic force microscope (AFM) to image the surface topography. Stress strain curves may be determined by employing sinusoidal loading concurrents with nanoDMA III (nanoscale Dynamic Mechanical Analysis).
-  * Person in charge: Marcus Hans
-===== Machine data =====
-  * Installed: 20??
-===== Documentation =====
-Ingenia User Manual
-https://134.130.64.55/dokuwiki/lib/exe/fetch.php?media=blog:ingeniausermanual.pdf
-Spare Parts Catalog
-https://134.130.64.55/dokuwiki/lib/exe/fetch.php?media=blog:sparepartscatalog.pdf